manualshive.com logo in svg

Asus RS700-E8-RS4 Series, User Manual, Page: 16 / 212

Share
Download
Asus RS700-E8-RS4 Series User Manual Download Page 16

Chapter 1:  Product introduction

1-6

1.6 

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive. Connect a USB floppy disk drive 

to any of the USB ports on the front or rear panel if you need to use a floppy disk.

WARNING

HAZARDOUS MOVING PARTS 

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. 

Power supply and power 

fan

2. 

ASUS Z10PP-D24 Server 

Board

3. 

System fans

4. 

4 x HDD trays

5. 

SATA/SAS backplane 

(hidden)

6. 

Slim-type optical drive 

(hidden)

7. 

PCI-E x8 slot (Gen3 x8 link) 

(OCP Mezzanine) (hidden)

8. 

Butterfly riser card 

9. 

Riser card (Gen3 x16 link)

10.  Asset tag (hidden)

A protection film is pre-attached to the front cover before shipping. Please remove the 

protection film before turning on the system for proper heat dissipation.

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Reviews:

No comments