Asus RS700-E8-RS4 Series User Manual Download Page 138

Page: 138 / 212

6-12

Chapter 6: RAID configuration

6.3

Intel

Rapid Storage Technology enterprise

(Windows)

The Intel

Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID

10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the

Serial ATA connectors supported by the Southbridge.

You can click

Rescan

to re-scan any attached hard disks.

Turn on the system to windows desktop.

Click the

Intel

Rapid Storage Technology enterprise

icon to display the main menu.

Your storage system is configured for data protection, increased performance and optimal

data storage capacity. You can create additional volumes to further optimize your storage

system.

To enter the Intel

Rapid Storage Technology enterprise utility under Windows operating system:

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews:

Asus RS700-E8-RS4 Series, User Manual, Page: 138 / 212

Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews: