manualshive.com logo in svg

Asus RS700-E8-RS4 Series, User Manual, Page: 132 / 212

Share
Download
Asus RS700-E8-RS4 Series User Manual Download Page 132

6-6

Chapter 6: RAID configuration

6. 

Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 

10 and 5 only) then press <Enter>. The available stripe size values range from 4 KB to 

128 KB. The following are typical values:

 

RAID 0: 128KB

 

RAID 10: 64KB

 

RAID 5: 64KB

We recommend a lower stripe size for server systems, and a higher stripe size for 

multimedia computer systems used mainly for audio and video editing.

7. 

In the Capacity field item, key in the RAID volume capacity that you want to use and 

press <Enter>. The default value indicates the maximum allowed capacity.

8. 

Press <Enter> to start creating the RAID volume. 

9.   From the following warning message, press <Y> to create the RAID volume and return 

to the main menu, or press <N> to go back to the CREATE VOLUME menu

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Reviews:

No comments