Asus RS700-E8-RS4 Series User Manual Download Page 79

Page: 79 / 212

5-3

ASUS RS700-E8-RS4 Series

Press <Tab> to switch to the

Drive

field.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,

then press <Enter>.

Press <Tab> to switch to the

Folder Info

field.

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

5.1.2

ASUS EZ Flash Utility

The ASUS EZ Flash Utility feature allows you to update the BIOS without having to use a

DOS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS website at

www.asus.com.

To update the BIOS using EZ Flash Utility:

Insert the USB flash disk that contains the latest BIOS file into the USB port.

Enter the BIOS setup program. Go to the

Tool

menu then select

ASUS

EZ Flash

Utility

. Press <Enter>.

ASUS Tek. EzFlash Utility

[Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit

FS0

System Volume Information

<DIR>

Windows

<DIR>

Z10PP-D24 BIOS

<DIR>

Current Platform

Platform : Z10PP-D24

Version : 0020

Build Date :04/25/2014

New Platform

Platform : Z10PP-D24

Version : 0022

Build Date :05/05/2014

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews:

Asus RS700-E8-RS4 Series, User Manual, Page: 79 / 212

Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews: