manualshive.com logo in svg

Asus RS700-E8-RS4 Series, User Manual, Page: 145 / 212

Share
Download
Asus RS700-E8-RS4 Series User Manual Download Page 145

ASUS RS700-E8-RS4 Series

6-19

3. 

Select a channel and press <Enter> to enter the setup.

The numbers of the channel depend on the controller.

6.4.1 

RAID 1 volume

The RAID 1 feature supports simultaneous mirrored volumes with two disks. 
The RAID 1 feature supports hot swap capability, so when a disk in an RAID 1 volume fails, 

you can easily restore the volume, and the swapped disk is automatically re-mirrored.
To create a RAID 1 volume:

1. 

Turn on the system after installing all SAS hard disk drives.

2. 

During POST, press <Ctrl>+<C> to enter the SAS configuration utility.

LSI Corporation MPT SAS2 BIOS 

MPT2BIOS-7.29.00.00 (2012.11.12) 

Copyright 2000-2012 LSI Corporation.

Press Ctrl-C to start LSI Corp Configuration Utility...a

To avoid data loss, do not turn off the system when rebuilding.

Esc = Exit Menu        F1/Shift+1 = Help 

Alt+N = Global Properties   -/+ = Alter Boot Order   Ins/Del = Alter 

Boot List

LSI Corp Config Utility            v7.29.00.00 (2012.11.12)

 

Adapter List

  Global Properties

Adapter             PCI   PCI   PCI   PCI    FW Revision       Status     Boot 

                    BUS   Dev   Fnc   Slot                               Order

 

Asus SAS2308-2

      

04    00    00    07     5.00.000.00-IR    Enabled

    

0

 

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Reviews:

No comments