Asus RS700-E8-RS4 Series User Manual Download Page 108

Page: 108 / 212

5-32

Chapter 5: BIOS setup

EV DFX Features [Disabled]

Set this option to allow DFX Lock Bits to remain clear.
Configuration options: [Disabled] [Enabled]

PCIE Slot Option ROM Configuration

PCIE1/ PCIE2/ MEZZPCIE1 Option ROM [Enabled]

Allows you to enable or disable the PCIE1/ PCIE2/ MEZZPCIE1 Option ROM.

Configuration options: [Disabled] [Enabled]

Intel VT for Directed I/O (VT-d)

Intel VT for Directed I/O (VT-d) [Enabled]

Allows you to enable or disable the Intel Virtualization Technology for Directed I/O.

Configuration options: [Disabled] [Enabled]

PCI Express Global Options

TX EQ WA [Enabled]

Use special table for TX_EQ and vendor specific cards.

Configuration options: [Disabled] [Enabled]

PCI-E ASPM Support (Global) [L1 Only]

This option enables or disables the ASPM support for all downstream devices.

Configuration options: [Disabled] [L1 Only]

5.5.6

IIO Configuration

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews:

Asus RS700-E8-RS4 Series, User Manual, Page: 108 / 212

Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews: