Asus RS700-E7/RS8 User Manual Download

Page: 57 / 194

ASUS RS700-E7/RS8

4-9

3. ISAS1 and ISATA1 connectors

The ISATA1 connector (AHCI) supports 2 SATA 3Gb/s ports + 2 SATA 6Gb/s

ports. Move the cable from default PSAS2 to ISATA1 to support HDD5 and

HDD6 (6Gb/s), and HDD7 and HDD8 (3Gb/s).

Ths ISAS1 connector (SCU) supports 4 SATA 3Gb/s ports. Move the cable

from default PSAS1 to ISAS1 to support HDD1, HDD2, HDD3, and

HDD4 (3Gb/s).

Ensure that the SGPIO_SEL1 jumper on the backplane is set to pins 2-3. Refer

2.7 SATAII/SAS backplane cabling

on page 2-19 for the jumper setting

details.

The actual data transfer rate depends on the speed of SAS/SATA hard disks

installed.

Z9PP-D24

Z9PP-D24 ISAS connectors

PSAS1

ISAS1

ISA

TA1

PSAS2

4. Hard disk activity LED connector (4-pin HDLED1)

This connector is used to connect to a hard disk drive active LED connector

on the SCSI or RAID card.

Z9PP-D24

Z9PP-D24 Storage card actisvity LED connector

NC ADD_IN_CARD- ADD_IN_CARD- NC

HDLED1

Summary of Contents for RS700-E7/RS8



































































































































































































Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands

Asus RS700-E7/RS8, User Manual

Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands