Asus RS700-E7/RS8 User Manual Download

Page: 143 / 194

ASUS RS700-E7/RS8

6-29

6.3.3

Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk

drives when you delete a RAID set.

To delete a RAID set:
1. From the utility main menu, select

2. Delete RAID Volume

and press

<Enter>. The following screen appears.

2. Use the up/down arrow keys to select the RAID set you want to delete, and

then press <Del>. The following warning message appears.

3. Press <Y> to delete the RAID set and return to the utility main menu, or press

<N> to return to the

DELETE VOLUME

menu.

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete volume “Volume0”? (Y/N):

[

DELETE VOLUME VERIFICATION

]

[

DELETE VOLUME MENU

]

[

HELP

]

Deleting a volume will reset the disks to non-RAID.

WARNING:

ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

[

↑↓

]-Select [ESC]-Previous Menu [DEL]-Delete Volume

Name Level Drives Capacity Status Bootable

Volume0 RAID0(Stripe) 2 298.0GB Normal Yes

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104

Summary of Contents for RS700-E7/RS8



































































































































































































Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands

Asus RS700-E7/RS8, User Manual

Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands