Asus RS700-E7/RS8 User Manual Download

Page: 16 / 194

Chapter 1: Product introduction

1-6

The barebone server does not include a floppy disk drive. Connect a USB floppy

disk drive to any of the USB ports on the front or rear panel if you need to use a

floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. Power supply and power

fan

2. PCI-E G3 x16 slot (x16

link) (FH/HL)

3. PIKE Slot
4. ASUS Z9PP-D24 Server

Board

5. System fans
6. SATA/SAS backplane

(hidden)

7. Hot-swap HDD tray 1–8

(SAS and SATA)

8. Front LED Board (FPB-

R12A)

9. Slim-type optical drive

A protection film is pre-attached to the front cover before shipping. Please

remove the protection film before turning on the system for proper heat

dissipation.

1.6

Internal features

The barebone server includes the basic components as shown.

Summary of Contents for RS700-E7/RS8



































































































































































































Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands

Asus RS700-E7/RS8, User Manual

Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands