C H A P T E R
8-1
Installation and Upgrade Guide for Cisco Secure Access Control System 5.6
8
Installing the Cisco SNS 3415 and Cisco SNS 3495
Hardware Appliances
This chapter describes how to install your Cisco SNS-3415 or Cisco SNS-3495 appliance and connect it
to the network.
It contains:
•
Installing the Cisco SNS-3415/3495 Appliance Rack, page 8-1
•
Cisco Integrated Management Controller (CIMC), page 8-5
•
Configuring CIMC, page 8-5
•
Connecting Cables, page 8-8
•
Connecting and Powering On the Cisco SNS-3415/3495 Appliance, page 8-11
Before you begin the installation, read the
Regulatory Compliance and Safety Information for the Cisco
3415 or 3495 Secure Access Control System.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Installing the Cisco SNS-3415/3495 Appliance Rack
This section describes how to install the Cisco SNS-3415 or Cisco SNS-3495 appliance in a rack.
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
