Asus R600 - Auto Light Sensor PND User Manual Download Page 78

Page: 78 / 109

Prompts

You can select the types of voice and visual notifications that you would

like to use while navigating. From the Settings menu, tap the Prompts

button. The Prompts screen appears.

Voice Prompts

Speed Warning

Warns you when your car exceeds the speed limit. This prompt is not

active by default.

Route

Recalculation

Activated when

Destinator

recalculates a new route. This prompt is

not active by default.

Unreliable GPS

Signal

Warns that the

GPS

signal is too low and unreliable for navigation. This

prompt is automatically active by default.

GPS Not Found

Alerts you if the

GPS

signal is lost, or if the power has been removed

from the

GPS

receiver.

Drive Carefully

Reminder at the start of each journey. This prompt is automatically

active by default.

Visual Prompts

Text

Directions are displayed as text.

Symbols

Directions are displayed as symbols.

None

Directions are not displayed.

Settings

Summary of Contents for R600 - Auto Light Sensor PND














































































































Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands

Asus R600 - Auto Light Sensor PND, User Manual

Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands