Asus R600 - Auto Light Sensor PND User Manual Download Page 5

Page: 5 / 109

- Shut the main power on the rear panel and contact your technical support staff immediately in

the following situations:
-  power cable is damaged,
-  cover panels break, and
-  the device is exposed to water or rain

CAUTION

! Use only batteries listed in user-instruction.
! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.
! All function about GPS or the similar are not intended to be used for location of persons,

especially for “life-safety” and “non-life-safety” applications.

Package contents

Standard items

-ASUS R600

device

-Quick Guide
-Map CD
-SD card

-Warrenty card
-Adapter
-Car charger

-Car kit

Note: The Standard items table is for your reference only. Package content may change

without notice.

Summary of Contents for R600 - Auto Light Sensor PND














































































































Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands

Asus R600 - Auto Light Sensor PND, User Manual

Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands