Asus R600 - Auto Light Sensor PND User Manual Download Page 35

Page: 35 / 109

The

Prompts

button lets you specify the types of voice or visual prompts that you want to

use. For more information, see “

Prompts

”.

The

Language

button lets you select the language for announcing travel prompts, street

names, and driving directions. For more information, see “

Language Settings

”.

The

GPS

button lets you configure the

GPS

settings. For more information, see “

GPS

Settings

”.

The

Help

button opens the

Destinator

help file.

The

Start Demo

button lets

Destinator

display a simulated route. Many of the

Destinator

navigation features are disabled when the Demo is running. You can end the Demo by

tapping the

Stop Demo

button.

The

Factory Restore

button lets you revert the device settings to that of the initial settings

after installation.
The

About

button opens an information box, providing version and copyright information.

Menu Command Buttons

The following command buttons let you navigate between menus and from the menu to the

map or device shell main screen.

The

Map

button lets you return to the

Main Map

screen.

The

Quit

button lets you close the

Destinator

Navigation System.

The

More

button lets you move between the

Destinations

and

Options

menus.

The

Settings

button on the

Options

menu lets you configure your

settings options.

Summary of Contents for R600 - Auto Light Sensor PND














































































































Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands

Asus R600 - Auto Light Sensor PND, User Manual

Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands