Asus R600 - Auto Light Sensor PND User Manual Download Page 28

Page: 28 / 109

Destinator Guided tour

When you first start the

Destinator

navigation system, a message

box prompts you to open the

Destinator Guided Tour

program. The

Guided Tour helps you to become familiar with the different navigation

features available. You can also start the

Destinator Guided Tour

any

time by tapping the

Tutorial

button from the

Extras

menu.

Technical Support

If you have other questions about the Destinator software, contact your supplier or Technical

Support:
Telephone: +49 (0)1805-123012
Email: [email protected]
Web Address: www.destinatortechnologies.com

Using the -way key

The 5-way key perform some hot-key functions as shown in the table below.

navigation

map

move upward

down

volume -

move downward

right

zoom in

move to the right

left

zoom out

move to the left

Summary of Contents for R600 - Auto Light Sensor PND














































































































Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands

Asus R600 - Auto Light Sensor PND, User Manual

Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands