When in the
Stops
screen, you can use the following commands:
Up/Down
Use the
Up
or
Down
buttons to change the order of your itinerary.
Next
Shows the stop destination on the map and lets you select a route
type,
Quick
or
Short
. Tap
Go
to calculate the stop destination.
Show
Select the
Show
button to view the selected stop destination on
the map.
Stops Actions
You can tap the
Actions
button for the following command options:
Set as Origin
Lets you designate the selected address as the route origin. You would
use this command when calculating a route from a point other than your
current location. Note: You are still connected to the
GPS
signal.
Add Stop
Lets you add a location by specifying an address from recent locations,
favorite locations, or pre-defined POIs, such as gas, food, or lodging.
Rename Stop
Lets you change the stop information, such as name, comments, or
route group.
Delete Stop
Lets you remove a selected stop.
Optimize Route
Your trip itinerary is created by the sequence of stops entered. This
may not be the most efficient route. When you click
Optimize Stops
,
Destinator
changes the order of stops to create the most efficient route.
Information
This button displays the location’s address information.
