Asus R600 - Auto Light Sensor PND User Manual Download Page 57

Page: 57 / 109

Traffic Information (Optional)

What is the Traffic Message Channel?

The Traffic Message Channel (

TMC)

is a specific application of the FM Radio Data System

(RDS) used for broadcasting real-time traffic and weather information. Data messages are

received silently, decoded, and delivered to a

TMC

-enabled navigation system that can

offer dynamic route guidance – alerting the driver to a problem on the planned route and

calculating an alternative route to avoid the incident.

Coverage of the Service

TMC

Services cover nearly all of Western Europe. Each service is transmitted by a national,

regional, or local broadcaster.

TMC

Service provides traffic information for monitored roads

only, motorways and main roads.

TMC

radio transmissions reception can change from area

to area, depending on weather conditions, static electricity, power lines, and other natural or

man-made conditions.

Disclaimer

Destinator Technologies

is not responsible for any damage caused by an accident due

to unreliable

TMC

radio transmissions by national, regional, or local broadcasters caused

TMC

service restrictions, or by natural and man-made conditions that prevent real-time

traffic and weather information from being delivered to the TMC-enabled navigation system.

Destinator Technologies

is not responsible for the quality or accuracy of the events

broadcast and the method by which they are displayed.

TMC Antenna Installation

Installing the

TMC

Antenna:

Summary of Contents for R600 - Auto Light Sensor PND














































































































Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands

Asus R600 - Auto Light Sensor PND, User Manual

Search results

Summary of Contents for R600 - Auto Light Sensor PND

Reviews:

Related manuals for R600 - Auto Light Sensor PND

Brands by name

Popular brands