Asus PCI-DA2200 User Manual Download Page 322

Page: 322 / 410

ASUS GUI RAID Manager: Array Management

4-30

4.12 Creating and Deleting Partitions

7. After defining the desired partitions, double-click the right

mouse button on the current logical volume.

8. From the displayed menu, select Partition. Then, select Set

Partition.

The logical volume is now ready for mapping to host LUNs. See
the Mapping Logical Volumes/Partitions to Host LUNs section
of this chapter.

Deleting logical volume partitions

1. Display the Volume window by clicking on the Logical

Volume command button or selecting the Logical Volume
command from the Open menu.

2. Double-click on the partition you wish to delete. The

following menu appears on the screen:

3. Select Partition. The following menu will appear on the

screen:

Summary of Contents for PCI-DA2200



























































































































































































































































































































































































































Search results

Summary of Contents for PCI-DA2200

Reviews:

Related manuals for PCI-DA2200

Brands by name

Popular brands

Asus PCI-DA2200, User Manual

Search results

Summary of Contents for PCI-DA2200

Reviews:

Related manuals for PCI-DA2200

Brands by name

Popular brands