Asus PCI-DA2200 User Manual Download Page 302

Page: 302 / 410

ASUS GUI RAID Manager: Array Management

4-10

4.4 Defining Enclosures

1. Double-click on the target drive bay. The following menu

will appear on the screen:

2. Select Remove Bay from Enclosure.

Moving an enclosure

1. Place the mouse pointer on the left-side or top-side of the

enclosure icon and press and hold the left mouse button.

2. Drag the icon to the desired location within the Enclosure

window. When you have reached the target location, release
the mouse pointer to drop the enclosure icon.

Deleting an enclosure

1. Double-click on any area of the enclosure icon, except on

occupied drive bays. The following message will appear on
the screen:

2. Click OK to delete the entire enclosure.

Summary of Contents for PCI-DA2200



























































































































































































































































































































































































































Search results

Summary of Contents for PCI-DA2200

Reviews:

Related manuals for PCI-DA2200

Brands by name

Popular brands

Asus PCI-DA2200, User Manual

Search results

Summary of Contents for PCI-DA2200

Reviews:

Related manuals for PCI-DA2200

Brands by name

Popular brands