ASUS P5N73-CM
2-3
d. Select the
Create.an.MS-DOS.startup.disk
check box.
e. Click
Start
.
2.
Copy the original or the latest motherboard BIOS file to the bootable floppy disk.
2.1.3.
ASUS.EZ.Flash.2.utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through
the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2
utility is built-in the BIOS chip so it is accessible by pressing
<Alt>.+.<F2>
during the Power-
On Self Tests (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.
3.
You can launch the EZ Flash 2 in two ways.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the floppy disk
drive or the USB port.
Press
<Alt>.+.<F2>
during POST to display the following.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.24
Current ROM
Update ROM
A:
Note
FLASH TYPE:
MXIC 25L8005
PATH:
A:\
BOARD:
P5N73-CM
VER:
0110
DATE:
07/10/2008
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
(2) Enter BIOS setup program. Go to the
Tools
menu to select
EZ.Flash.2
and press
<Enter>
to enable it.
You can switch between drives by pressing
<Tab>
before the correct file is found.
Then press
<Enter>
.
4.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
• This function can support devices such as USB flash disk, or floppy disk with
FAT.32/16.
format and single partition only.
• Do not shut down or reset the system while updating the BIOS to prevent system boot
failure!
Summary of Contents for P5N73-CM
Page 1: ...Motherboard P5N73 CM ...
