Asus P5N73-CM Manual Download Page 46

Page: 46 / 64

2-6

Chapter 2: BIOS setup

The utility saves the current

BIOS file to the floppy disk,

then returns to the BIOS

flashing process.

Type a filename for the

current BIOS file in the Save

current BIOS as field, then

press <Enter>.

AwardBIOS Flash Utility for ASUS V1.17

Message:

Please Wait!

For 690G-SB600-P5N73-CM_H-00 DATE:

12/12/2006

Flash Type - Winbond W39V080A (8Mb)

File Name to Program:

0113.bin

Checksum: D800H

Save current BIOS as:

0112.bin

AwardBIOS Flash Utility for ASUS V1.17

Message:

Please Wait!

For 690G-SB600-P5N73-CM_H-00 DATE:

12/12/2006

Flash Type - Winbond W39V080A (8Mb)

File Name to Program:

0113.bin

Now Backup System BIOS to

File!

2.1.6.

ASUS.CrashFree.BIOS.2.utility

The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file

when it fails or gets corrupted during the updating process. You can update a corrupted BIOS

file using the motherboard support DVD or the floppy disk that contains the updated BIOS

file.

• Prepare the motherboard support DVD,

or the floppy disk containing the updated

motherboard BIOS before using this utility.

• Ensure that you rename the original or updated BIOS file in the floppy disk or the USB

flash disk to

P5N73CM.ROM

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:

Turn on the system.

Insert the floppy disk with the original or updated BIOS file to the floppy disk drive.

The utility displays the following message and automatically checks the floppy disk for

the original or updated BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

Summary of Contents for P5N73-CM

































































Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands

Asus P5N73-CM, Manual

Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands