Asus P5N73-CM Manual Download Page 11

Page: 11 / 64

ASUS P5N73-CM

1-1

Chapter.1

Product.introduction

1.1.

Welcome!

Thank you for buying an ASUS

P5N73-CM motherboard!

The motherboard delivers a host of new features and latest technologies, making it another

standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in

your package with the list below.

1.2.

Package.contents

Check your motherboard package for the following items.

Motherboard

ASUS P5N73-CM motherboard

Cables

1 x Serial ATA cable

1 x Serial ATA power cable

1 x Ultra DMA 133 cable

Accessories

1 x I/O shield

Application.DVD

ASUS motherboard support DVD

Documentation

User Manual

If any of the above items is damaged or missing, contact your retailer.

1.3.

Special.features

1.3.1.

Product.highlights

LGA775.Intel

.Quad-core.Processor.Ready

This motherboard supports the latest Intel® Quad-core processors in

LGA775 package. It also can support Intel® next generation 45nm Multi-

Core CPU. It´s excellent for multi-tasking, multi-media and enthusiastic

gamers with 1333/1066/800 MHz FSB.

Summary of Contents for P5N73-CM

































































Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands

Asus P5N73-CM, Manual

Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands