2-22
Chapter 2: BIOS setup
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a key.
Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat. Configuration options:
[250] [500] [750] [1000]
Full.Screen.LOGO.[Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Halt.On.[All.Errors]
Allows you to error report type. Configuration options: [All Errors] [No Errors] [All, But
Diskette]
2.6.4.
Security
Supervisor.Password..
.
.
.
.
.
User.Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2.
Type in a password using a combination of a maximum of eight (8) alpha-numeric
characters, then press <Enter>.
3. When prompted, confirm the password by typing the exact characters again, then
press <Enter>. The password field setting is changed to Set.
To clear the password:
1.
Select the password field and press <Enter> twice. The following message appears:
Ensure that the above item is set to [Enabled] if you want to use the ASUS MyLogo2™
feature.
PASSWORD DISABLED !!!
Press any key to continue...
2.
Press any key to continue. The password field setting is changed to Clear.
A note about passwords
The Supervisor password is required to enter the BIOS Setup program preventing
unauthorized access. The User password is required to boot the system preventing
unauthorized use.
Summary of Contents for P5N73-CM
Page 1: ...Motherboard P5N73 CM ...
