Asus P5N73-CM Manual Download Page 34

Page: 34 / 64

1-24

Chapter 1: Product introduction

5..

IDE.connector.(40-1.pin.PRI_IDE)

The onboard IDE connector is for the Ultra DMA 100/66/33 signal cable. There are

three connectors on each Ultra DMA 100/66/33 signal cable: blue, black, and gray.

Connect the blue connector to the motherboard’s IDE connector, then select one of the

following modes to configure your device.

Drive.jumper.setting

Mode.of.device(s)

Cable.connector

Single device

Cable-Select or Master

Black

Two devices

Cable-Select

Master

Black

Slave

Gray

Master

Black or gray

Slave

• Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA

cable connector. This prevents incorrect insertion when you connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 100/66/33 IDE devices.

If any device jumper is set as “Cable-Select,” ensure that all other device jumpers have the

same setting.

P5N73-CM

IDE Connector

NOTE:

Orient the red markings

(usually zigzag) on the ID

ribbon cable to PIN 1.

PRI_IDE

PIN1

P5N73-CM

Summary of Contents for P5N73-CM

































































Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands

Asus P5N73-CM, Manual

Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands