ASUS P5N73-CM
2-21
Vcore,.Vcc.12,.Vcc.3.3V,.5V.
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Configuration options: [xxx] [Ignored]
CPU.Fan.Speed.warning.[600.RPM].
Sets the CPU fan speed warning feature. Configuration options: [Disabled] [600RPM]
[1200RPM] [1600RPM]
2.6.
Boot.menu
The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the sub-menu.
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power
Boot
Tools Exit
Select Menu
Item Specific Help
Select Boot Device
Priority
Boot Device Priority
Removable Drives
Boot Settings Configuration
Security
1st.~.4th.Boot.Device.[Removable]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [Removable] [Hard Disk] [CDROM] [Disabled]
2.6.2.
Removable.Drives
1..Floppy.Disks
Allows you to assign a removable drive attached to the system.
2.6.3
Boot Settings Configuration
Quick.Boot.[Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled, the system
skips certain tests while booting. Configuration options: [Disabled] [Enabled]
Boot.Up.Floppy.Seek.[Disabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the chassis
open status. Configuration options: [Disabled] [Enabled]
Bootup.Num-Lock.[On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic.Rate.Setting.[Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic Rate (Chars/
Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become user-
configurable only when the item Typematic Rate Setting is enabled.
Summary of Contents for P5N73-CM
Page 1: ...Motherboard P5N73 CM ...
