Asus P5N73-CM Manual Download Page 44

Page: 44 / 64

2-4

Chapter 2: BIOS setup

2.1.4.

Updating.the.BIOS

The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility.

Follow these instructions to update the BIOS using this utility.

Download the latest BIOS file from the ASUS web site. Rename the file to P5N73CM.

BIN and save it to a floppy disk, CD ROM or a USB flash disk in FAT 16/12 format.

Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file.

Copy the AwardBIOS Flash Utility (awdflash.exe) from the Software folder of the

support CD to the floppy disk, CD ROM or a USB flash disk with the latest BIOS file.

Boot the system in DOS mode using the bootable floppy disk, CD ROM or a USB flash

disk you created earlier.

4. Under the DOS mode, use <X:> (X stands for the name of the disk assignment) to

switch to the folder of the floppy disk, CD ROM or USB flash disk you saved the BIOS

file and the Award BIOS Flash Utility.

At the prompt, type awdflash then press <Enter>. The Award BIOS Flash Utility screen

appears.

Type the BIOS file name in

the File Name to Program

field, then press <Enter>.

AwardBIOS Flash Utility for ASUS V1.17

Message:

Please input File Name!

For 690G-SB600-P5N-73CM_H-00 DATE:

12/12/2006

Flash Type - Winbond W39V080A (8Mb)

File Name to Program:

AwardBIOS Flash Utility for ASUS V1.17

Message:

Please input File Name!

For 690G-SB600-P5N73-CM_H-00 DATE:

12/12/2006

Flash Type - Winbond W39V080A (8Mb)

File Name to Program:

P5N73CM.bin

Summary of Contents for P5N73-CM

































































Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands

Asus P5N73-CM, Manual

Search results

Summary of Contents for P5N73-CM

Reviews:

Related manuals for P5N73-CM

Brands by name

Popular brands