Asus P535 User Manual Download Page 118

Page: 118 / 132

118

Mode switcher allows you to easily switch between applications and tasks.
To use the mode switcher, press the mode switcher button on your device keypad. Press again
to shift between applications.

You can also use the mode switcher button to turn the flash light on or off. Press and hold the

mode switcher button to use this feature.

Mode switcher button

You can configure the mode switcher and define the switcher type or select items to appear in

the mode switcher pop-up menu.

To define the switcher type:

1. Tap

Start

Settings

System

Mode Switcher

icon.

2. Tap the radio buttons to select the Switcher type.
3. Tap and drag the handle bar to set the switch Waiting Time.

To select items to appear in the switcher pop-up menu:

1. Tap

Start

Settings

System

Mode Switcher

icon.

2. Tap the Items tab.
3. Select the items by tapping the check boxes.

Mode switcher

Mode switcher pop-up menu

Summary of Contents for P535





































































































































Search results

Summary of Contents for P535

Reviews:

Related manuals for P535

Brands by name

Popular brands

Asus P535, User Manual

Search results

Summary of Contents for P535

Reviews:

Related manuals for P535

Brands by name

Popular brands