manualshive.com logo in svg

Asus P4SE, User Manual

Share
Download
Asus P4SE User Manual Download Page 56

2-22

Chapter 2: BIOS Information

If any of the monitored items is out of range, the following error
message appears: “Hardware Monitor found an error. Enter Power
setup menu for details”. You will then be prompted to “Press F1 to
continue or DEL to enter SETUP”.

CPU Fan Speed [xxxxRPM], Chassis Fan Speed [xxxxRPM],
Power Fan Speed[xxxxRPM]

The onboard hardware monitor automatically detects and displays the
CPU, chassis, and power fan speeds in rotations per minute (RPM). If any
of the fans is not connected to the motherboard, that field shows N/A.

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage

The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.

2.6

Boot Menu

2.5.2 Hardware Monitor

MB Temperature [xxxC/xxxF], CPU Temperature [xxxC/xxxF],
Power Temperature [N/A]

The onboard hardware monitor automatically detects and displays the
motherboard, CPU and Power supply temperatures.

Summary of Contents for P4SE







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands