manualshive.com logo in svg

Asus P4SE, User Manual

Share
Download
Asus P4SE User Manual Download Page 51

ASUS P4SE Motherboard

2-17

Slot 1/5, Slot 2/6, Slot 3, Slot 4 IRQ [Auto]

These fields assign the IRQ for each PCI slot. The default setting for each
field is [Auto], which utilizes auto-routing to determine IRQ assignments.
Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]

PCI/VGA Palette Snoop [Disabled]

Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled] corrects
this problem. If you are using  standard VGA cards, leave this field to the
default setting [Disabled]. Configuration options: [Disabled] [Enabled]

PCI Latency Timer [32]

Leave this field to the default setting [32] for best performance and
stability.

Primary VGA BIOS [PCI VGA Card]

This field allows you to select the primary graphics card or the onboard
VGA. The option [Onboard VGA] appears only if you installed a PCI or
AGP card. Configuration options: [PCI VGA Card] [AGP VGA Card]

USB Function [Enabled]

This field allows you to select the number of USB 1.1 controllers that you
wish to activate. Configuration options: [Disabled] [Enabled]

2.4.3 PCI Configuration

Onboard Game Port [200H-207H]

This field allows you to select the I/O address for the game port.
Configuration options: [Disabled] [200H-207H] [208H-20FH]

Onboard MIDI I/O [Disabled]

This field allows you to select the I/O address for the MIDI port.
Configuration options: [Disabled] [330H-331H] [300H-301H]

Summary of Contents for P4SE







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands