Asus P3-P5G31 User Manual Download Page 72

Page: 72 / 100

5-8

Chapter 5: BIOS setup

• Only the USB flash disk with FAT 32/16 format and single partition can

support ASUS CrashFree BIOS 3. The device size should be smaller than

8GB.

• DO NOT shut down or reset the system while updating the BIOS! Doing so

can cause system boot failure!

Recovering the BIOS from the USB flash disk

To recover the BIOS from the USB flash disk:
1. Insert the USB flash disk that contains BIOS file to the USB port.

2. Turn on the system.

3. The utility will automatically checks the devices for the BIOS file When found,

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4. Restart the system after the utility completes the updating process.

The recovered BIOS may not be the latest BIOS version for this motherboard.

Visit the ASUS website (www.asus.com) to download the latest BIOS file.

Summary of Contents for P3-P5G31





































































































Search results

Summary of Contents for P3-P5G31

Reviews:

Related manuals for P3-P5G31

Brands by name

Popular brands

Asus P3-P5G31, User Manual

Search results

Summary of Contents for P3-P5G31

Reviews:

Related manuals for P3-P5G31

Brands by name

Popular brands