Asus P3-P5G31 User Manual Download Page 48

Page: 48 / 100

3-4

Chapter 3: Getting started

3.2.3

Utilities menu

The Utilities menu shows the applications and other software that the motherboard

supports.

ASUS InstAll-Installation Wizard for Utilities

Installs all of the utilities through the Installation Wizard.

Athero Ethernet utility

Installs the Athero Ethernet utility.

ASUS Update

Allows you to download the latest version of the BIOS from the ASUS website.

Before using the ASUS Update, make sure that you have an Internet connection

so that you can connect to the ASUS website.

ASUS PC Probe II

This smart utility monitors the fan speed, CPU temperature, and system voltage,

and alerts you of any detected problems. This utility helps you keep your computer

in healthy operating condition.

ASUS Screen Saver

Installs the ASUS screen saver.

Summary of Contents for P3-P5G31





































































































Search results

Summary of Contents for P3-P5G31

Reviews:

Related manuals for P3-P5G31

Brands by name

Popular brands

Asus P3-P5G31, User Manual

Search results

Summary of Contents for P3-P5G31

Reviews:

Related manuals for P3-P5G31

Brands by name

Popular brands