Asus P3-P5G31 User Manual Download Page 71

Page: 71 / 100

ASUS P3-P5G31

5-7

DO NOT shut down or reset the system while updating the BIOS! Doing so can

cause system boot failure!

4. Restart the system after the utility completes the updating process.

When found, the utility reads the BIOS file and starts flashing the corrupted

BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Floppy found!

Reading file “

P5KPLVM.ROM”. Completed.

Start flashing...

Recovering the BIOS from the support CD

To recover the BIOS from the support CD:

1. Remove any floppy disk from the floppy disk drive, then turn on the system.

2. Insert the support CD to the optical drive.
3. The utility displays the following message and automatically checks the

floppy disk for the original or updated BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Floppy not found!
Checking for CD-ROM...
CD-ROM found!

Reading file “

P5KPLVM.ROM”. Completed.

Start flashing...

When no floppy disk is found, the utility automatically checks the optical drive

for the original or updated BIOS file. The utility then updates the corrupted

BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Summary of Contents for P3-P5G31





































































































Search results

Summary of Contents for P3-P5G31

Reviews:

Related manuals for P3-P5G31

Brands by name

Popular brands

Asus P3-P5G31, User Manual

Search results

Summary of Contents for P3-P5G31

Reviews:

Related manuals for P3-P5G31

Brands by name

Popular brands