Asus Maximus II Gene User Manual Download Page 112

Page: 112 / 174

3-38

Chapter 3: BIOS setup

3.�.2

Boot Settings Configuration

Quick Boot [Enabled]

Allows you to enable or disable the

Quick Boot

function.

[Disabled]

When set to [Disabled], BIOS performs all the POST items.

[Enabled]

When set to [Enabled], BIOS skips some power on self tests

(POST) while booting to decrease the time needed to boot the

system.

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.
[Enabled]

Enables the full screen logo display feature.

[Disabled]

Disables the full screen logo display feature.

Set this item to [Enabled] to use the ASUS MyLogo3™ feature.

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.
[Force BIOS]
[Keep Current] .

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.
[On]

Sets the power-on state of the NumLock to [On].

[Off]

Sets the power-on state of the NumLock to [Off].

Wait for ‘F�’ If Error [Enabled]

When set to [Enabled], the system waits for the <F1> key to be pressed when error

occurs.

Hit ‘DEL’ Message Display [Enabled]

When set to [Enabled], the system displays the message “Press DEL to run Setup”

during POST.

BIOS SETUP UTILITY

Boot

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

Wait for ‘F1’ if Error

[Enabled]

Hit ‘DEL’ Message Display [Enabled]

Allows BIOS to skip

certain tests while

booting. This will

decrease the time

needed to boot the

system.

Summary of Contents for Maximus II Gene















































































































































































Search results

Summary of Contents for Maximus II Gene

Reviews:

Related manuals for Maximus II Gene

Brands by name

Popular brands

Asus Maximus II Gene, User Manual

Search results

Summary of Contents for Maximus II Gene

Reviews:

Related manuals for Maximus II Gene

Brands by name

Popular brands