Asus Maximus II Gene User Manual Download Page 101

Page: 101 / 174

ROG Maximus II GENE

3-27

The

USB Devices Enabled

item shows the auto-detected values. If no USB

device is detected, the item shows None.

USB Functions [Enabled]

[Enabled]

Enables the USB Host Controllers.

[Disabled]

Disables the controllers.

The following items appear only when you set

USB Functions

to [Enabled].

USB 2.0 Controller [Enabled]

[Enabled]

Enables the USB 2.0 controller.

[Disabled]

Disables the controller.

USB 2.0 Controller Mode [HiSpeed]

[FullSpeed]

Set the USB 2.0 controller mode to FullSpeed (12 Mbps).

[HiSpeed]

Set the USB 2.0 controller mode to HiSpeed (480 Mbps).

The

USB 2.0 Controller Mode

item appears only when you enable the

USB

2.0 Controller

BIOS EHCI Hand-off [Enabled]

[Enabled]

Enables the support for operating systems without an EHCI

hand-off feature.

[Disabled]

Disables the function.

Onboard VIA 1394 [Enabled]

[Enabled]

Enables the VIA 1394 controller.

[Disabled]

Disables the controller.

3.�.4

USB Configuration

The items in this menu allows you to change the USB-related features. Select an

item then press <Enter> to display the configuration options.

BIOS SETUP UTILITY

Advanced

USB Configuration

USB Devices Enabled:

None

USB Functions

[Enabled]

USB 2.0 Controller

[Enabled]

USB 2.0 Controller Mode

[HiSpeed]

BIOS EHCI Hand-off

[Enabled]

Legacy USB Support

[Auto]

Options

Disabled

Enabled

Summary of Contents for Maximus II Gene















































































































































































Search results

Summary of Contents for Maximus II Gene

Reviews:

Related manuals for Maximus II Gene

Brands by name

Popular brands

Asus Maximus II Gene, User Manual

Search results

Summary of Contents for Maximus II Gene

Reviews:

Related manuals for Maximus II Gene

Brands by name

Popular brands