Asus Maximus II Gene User Manual Download Page 79

Page: 79 / 174

ROG Maximus II GENE

3-5

3.1.3

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to

restore the BIOS file when it fails or gets corrupted during the updating process.

You can restore a corrupted BIOS file using the motherboard support DVD or a

USB flash drive that contains the BIOS file.

The BIOS file in the motherboard support DVD may be older than the BIOS file

published on the ASUS official website. If you want to use the newer BIOS file,

download the file at support.asus.com and save it to a USB flash drive.

Recovering the BIOS

To recover the BIOS
1. Turn on the system.

2. Insert the motherboard support DVD to the optical drive, or the USB flash

drive containing the BIOS file to the USB port.

3. The utility automatically checks the devices for the BIOS file. When found,

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4. Turn off the system after the utility completes the updating process and

power on again.

5. The system requires you to enter BIOS Setup to recover BIOS setting. To

ensure system compatibility and stability, we recommend that you press

<F2> to load default BIOS values.

DO NOT shut down or reset the system while recovering the BIOS! Doing so

can cause system boot failure!

Summary of Contents for Maximus II Gene















































































































































































Search results

Summary of Contents for Maximus II Gene

Reviews:

Related manuals for Maximus II Gene

Brands by name

Popular brands

Asus Maximus II Gene, User Manual

Search results

Summary of Contents for Maximus II Gene

Reviews:

Related manuals for Maximus II Gene

Brands by name

Popular brands