Asus KFN5-Q - Motherboard - nForce Pro 3600 User Manual Download Page 75

Page: 75 / 175

ASUS KFN5-Q Series

4-5

4. Restart the system after the utility completes the updating process.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “I8044A00.ROM”. Completed.
Start flashing...

DO NOT shut down or reset the system while updating the BIOS! Doing

so can cause system boot failure!

Recovering the BIOS from the support CD

To recover the BIOS from the support CD:

1. Remove any floppy disk from the floppy disk drive, then turn on the

system.

2. Insert the support CD to the optical drive.
3. The utility displays the following message and automatically checks

the floppy disk for the original or updated BIOS file.

When no floppy disk is found, the utility automatically checks the

optical drive for the original or updated BIOS file. The utility then

updates the corrupted BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

The recovered BIOS may not be the latest BIOS version for this

motherboard. Visit the ASUS website (www.asus.com) to download the

latest BIOS file.

4. Restart the system after the utility completes the updating process.

DO NOT shut down or reset the system while updating the BIOS! Doing

so can cause system boot failure!

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading file “I8044A00.ROM”. Completed.
Start flashing...

Summary of Contents for KFN5-Q - Motherboard - nForce Pro 3600
















































































































































































Search results

Summary of Contents for KFN5-Q - Motherboard - nForce Pro 3600

Reviews:

Brands by name

Popular brands

Asus KFN5-Q - Motherboard - nForce Pro 3600, User Manual

Search results

Summary of Contents for KFN5-Q - Motherboard - nForce Pro 3600

Reviews:

Brands by name

Popular brands