manualshive.com logo in svg

Asus KFN5-Q - Motherboard - nForce Pro 3600, User Manual, Page: 35 / 175

Share
Download
Asus KFN5-Q - Motherboard - nForce Pro 3600 User Manual Download Page 35

2-14

Chapter 2: Hardware information

5.  When the fan and heatsink assembly is in place, connect the CPU fan 

cable to the appropriate connector on the motherboard, CPU_FAN1, 

CPU_FAN2, CPU_FAN3, or CPU_FAN4.

•  Do not forget to connect the CPU fan connector! Hardware 

monitoring errors can occur if you fail to plug this connector.

•  If there is only one CPU fan cable, connect it to the connector 

labeled CPU_FAN1. Failure to do so may cause hardware monitoring 

errors.

2.4 

System memory

2.4.1  Overview

The motherboard comes with sixteen 240-pin Double Data Rate II (DDR2) 

Dual Inline Memory Modules (DIMM) sockets.

The following figure illustrates the location of the sockets:

KFN5-Q/SAS

KFN5-Q Series 240-pin DDR2 DIMM Sockets

112 Pins

128 Pins

DIMM_C2
DIMM_D1
DIMM_C1

DIMM_D2

DIMM_A1
DIMM_B1
DIMM_A2
DIMM_B2

DIMM_E2
DIMM_F1
DIMM_E1

DIMM_F2

DIMM_G1
DIMM_H1
DIMM_G2
DIMM_H2

Summary of Contents for KFN5-Q - Motherboard - nForce Pro 3600
















































































































































































Reviews:

No comments