manualshive.com logo in svg

Asus KFN5-Q - Motherboard - nForce Pro 3600, User Manual, Page: 24 / 175

Share
Download
Asus KFN5-Q - Motherboard - nForce Pro 3600 User Manual Download Page 24

ASUS KFN5-Q Series

2-3

2.2 

Motherboard overview

Before you install the motherboard, study the configuration of your chassis 

to ensure that the motherboard fits into it. 

2.2.1  Placement direction

When installing the motherboard, make sure that you place it into the 

chassis in the correct orientation. The edge with external ports goes to the 

rear part of the chassis as indicated in the image below.

2.2.2  Screw holes

Place 15 screws into the holes indicated by circles to secure the 

motherboard to the chassis.

Place this side 

towards the rear of 

the chassis

Do not overtighten the screws! Doing so can damage the motherboard.

Make sure to unplug the power cord before installing or removing the 

motherboard. Failure to do so can cause you physical injury and damage 

motherboard components.

KFN5-Q/SAS

Summary of Contents for KFN5-Q - Motherboard - nForce Pro 3600
















































































































































































Reviews:

No comments