Asus INET-810 Page 68 User Manual Download

Page: 68 / 90

Status and Monitoring

PPP IP
Address

The IP Address used by this device. This address is
provided by the ISP on connection.

Modem Log

This shows the commands sent to the modem, and any status messages returned by
the modem. Note that this is not "live"; you must click Refresh to update the infor-
mation.

The following table shows the more common messages, and their meaning.

Message

Description

Dialing

Dialing the ISP

Try to establish
physical connection.

The device is trying to connect with the ISP, using
the modem.

Busy error

The number dialed was busy.

Physical line is
connected

Physical connection to ISP has been established.

CONNECT nnnnnn

Physical connection was successful; nnnnnn indi-
cates the speed of the serial link as currently
configured.

Max phone line
speed nnnnnn bps

nnnnnn is the maximum speed of the modem,
according to the current configuration.

DCD low,
DSR low

Physical line break, connection lost.

send “-----“

wait “-----“

“AT” commands sent to the modem are displayed
as they are sent.
Commands in the Script file are also displayed as
they are executed.

Start PPP

Having established a physical connection, a PPP
connection is now being established.

PPP up fail

The PPP connection could not be established.

PPP up successfully

The PPP connection was established successfully.

Stop PPP

The PPP connection was terminated. This will
occur at the end of a session, or an error condition.

Summary of Contents for INET-810



























































































Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands

Asus INET-810, User Manual

Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands