manualshive.com logo in svg

Asus INET-810, User Manual

Share
Download
Asus INET-810 User Manual Download Page 35

Internet Router User Guide

28

Figure 14 Printer Port Configuration

6.

 

Click the Browse Device button. All Internet Routers on your LAN will be

listed. Select the desired unit.

The name shown is the Internet Router's
default name, which includes the Hardware
Address of the device.

7.

 

Enter the configuration information as detailed in Printer Port Configuration

Data on page 26.

8.

 

Follow the on-screen instructions to finish adding a printer as normal.

Configuration is now complete. You can now print using the printer connected to
the Internet Router.

Windows NT 4.0

1.

 

Go to Start

4

Settings

4

Printers. Start the Add Printer Wizard.

2.

 

When prompted for which computer will manage the printer, select the My

Computer option.

3.

 

Choose the Printer Model matching the printer attached to the Internet Router.

4.

 

Select PrintServer as the port in the Select Port screen. Ensure that ONLY the

PrintServer port is selected, as shown in the example below.

Summary of Contents for INET-810



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands