background image

Internet Router User Guide

16

3. Connect ISDN Phone Line

Using a cable fitted with RJ45 plugs, connect the ISDN port on the Internet Router
to the S/T interface on the NT-1 (Network Termination 1) ISDN terminator.

4. Connect Printer (INET-830 and INET-850 only)

Using a standard printer cable, connect the printer to the printer port on the
Internet Router.

5. Power On and Check the LEDs

Connect the supplied power adapter to the Internet Router and press the ON/OFF
switch on the back of the Internet Router. (In is ON.) When the Internet Router is
powered On, all LEDs should blink, then, except for the PWR LED, go off.

If the ERR LED stays on, or both the ERR and LNK LEDs continue to blink, there
is a hardware problem.

For more information on the LEDs, refer to LED Indicators on page 10 and
Link/Error LEDs on page 11.

Warning!

Only use the power adapter provided. Using a different one
may cause hardware damage.

Internet Router Configuration

The Internet Router contains a HTTP server. This enables you configure it using
your Web Browser. Most Browsers should work, provided they support HTML
tables and forms.

Preparation

Ensure your PC is using the TCP/IP protocol, and configure it to use the Internet
Router’s DHCP server, as follows:

DHCP Client Setup - Windows 95/98

1.

 

Select the Network Neighborhood icon on the desktop, then Properties. You

will see a screen like the one below:

Summary of Contents for INET-810



























































































Reviews: