Asus INET-810 Page 74 User Manual Download

Page: 74 / 90

A - Troubleshooting

problem:

Select Network printer when asked "How is the printer

attached to your computer?"

When prompted for Network Path or Queue name enter

a dummy name such as \\12345 and select Next.

The printer wizard will display a message stating "The

Network Printer is off-line". This is OK. Continue to in-
stall the printer as normal. Do NOT attempt to print a
test page.

When you are finished adding your printer, go to Set-

tings

Printers and select your printer. The printer icon

will be faded out indicating the printer is "off-line" and
unavailable.

For Windows 95, select Properties

Details. For Win-

dows NT 4.0, select Ports. Then select print server
(PrintServer) as the port for this printer.

Close the Properties window. With the Printer icon still

selected, goto the File menu and ensure Work Off-line is
NOT checked.

If the printer is connected properly and powered On, the

printer icon should now be enabled and ready for print-
ing.

Problem 2

I connected and configured a WPS (Windows Printing
System) printer as described, but I can’t get the print job
to print.

Solution 2

When a WPS printer is configured as a Local printer, the
printer driver polls the printer before sending print data.
Since the printer is networked, the printer is not detected and
no data is sent.

Simply add your printer as a network printer as described in
Solution 1 above.

Some popular WPS printers are listed below:

Canon LBP-430W
Epson ActionLaser 1300/W
Epson EPL-5500/W
HP LaserJet 5L
Lexmark WinWriter 100,200,400,600

Summary of Contents for INET-810



























































































Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands

Asus INET-810, User Manual

Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands