Asus INET-810 Page 83 User Manual Download

Page: 83 / 90

Appendix C

Windows Peer-to-peer

Overview

This appendix explains how to configure Windows 95/98 to enable a Peer-to-peer
network, using the TCP/IP protocol.

A “Peer-to-peer” network is a network which does not have a dedicated server, but
one or more PCs will allow the other PCs to access their resources (Disk, folders, or
printer).

Procedure

The steps are:

Install Network cards and drivers

Install and Configure the TCP/IP protocol.

Configure Peer-to-peer networking.

Install Network Cards & Drivers

Install a Network card (NIC) on each PC. Follow the instructions provided

with the NIC.

Connect cables from each PC to the hub.

Restart each PC, and install the drivers for the Network card. Follow the

instruction provided with the NIC.

If you need to change the drivers used by your NIC, follow this procedure:

Go to Settings-Control Panel-System-Device Manager.

Click on the "+" sign next to "Network Adapter" to display your NIC. Click on

your NIC, then select Properties.

Select the Driver Tab.

Click the "Update Driver" button, and follow the prompts.

Summary of Contents for INET-810



























































































Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands

Asus INET-810, User Manual

Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands