manualshive.com logo in svg

Asus INET-810, User Manual

Share
Download
Asus INET-810 User Manual Download Page 54

Serial Port

47

Internet Account Details

The following data is available from your ISP (Internet Service Provider).

Account (User) Name

Enter the account name provided by your ISP.
This name will be used to log in to the ISP’s
server.

Account Password

Enter the current password for the above account.

Verify Password

Re-enter the password to ensure it is correct.

IP Address
provided by ISP

Enter the IP address assigned to you by your ISP.
If the ISP issues dynamic IP addresses, leave this
field as 0.0.0.0. (With dynamic IP addresses, a
valid address is provided upon connection.)

DNS IP Address

The DNS (Domain Name Server) translates
names (e.g. microsoft.com) to IP Addresses.
Enter the DNS IP address supplied or recom-
mended by your ISP.

Connect to this
Account by

Select Dial up line if you connect by Modem or
ISDN TA.
Select Leased Line(Null modem) if you have a
continuous connection. You can then ignore the
Dial-up Connection section.

Dial-up Connection Details

If you are using a dial-up connection, the following data must also be provided.

Telephone

One (1) number is essential. Use the format described in
your modem's user manual.

Modem

If your modem or ISDN TA is listed, simply select it.
Otherwise, try "Hayes compatible".
If this does not work, select "Other" and enter the required
"Initial String", as described below

Summary of Contents for INET-810



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands