Asus INET-810 Page 66 User Manual Download

Page: 66 / 90

Status and Monitoring

Common messages are shown in the following table.

Message

Description

Dialing

Dialing the ISP

Try to establish
physical connection.

The device is trying to connect with the ISP.

Busy error

The number dialed was busy.

Physical line is
connected

Physical connection to ISP has been established.

Start PPP

A PPP connection is now being established.

PPP up fail

The PPP connection could not be established.

PPP up successfully

The PPP connection was established successfully.

Stop PPP

The PPP connection was terminated. This will
occur at the end of a session, or an error condition.

Idle timer expires

The “Idle time-out” has been triggered. (There was
no data sent or received for the duration of the “Idle
time” period.)

Port Status/Test Screen

This screen can be reached by links on the Status, Port Configuration and Ad-
vanced Port Settings screens.

Summary of Contents for INET-810



























































































Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands

Asus INET-810, User Manual

Search results

Summary of Contents for INET-810

Reviews:

Related manuals for INET-810

Brands by name

Popular brands