Asus ESC700 User Manual Download Page 68

Page: 68 / 160

Chapter 3: Motherboard Information

3-20

USB 3.0 connectors (20-1 pin USB3_12, USB3_34)

These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of

USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for

USB-chargeable devices, optimized power efficiency, and backward compatibility with

USB 2.0.

The USB 3.0 module is purchased separately.

•

Ensure to install the related driver to fully use the USB 3.0 ports under Windows

•

The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the

operating system’s setting.

•

These USB 3.0 ports support native UASP transfer standard in Windows

8 /

Windows

8.1 and Turbo Mode when using USB 3.0 Boost feature.

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Brands by name

Popular brands