Asus ESC700 User Manual Download Page 147

Page: 147 / 160

ASUS ESC700 G3

5-9

5.2.2

Creating a RAID driver disk in Windows

To create a RAID driver disk in Windows

Start Windows

2. Plug the USB floppy disk drive and insert a floppy disk.

3. Place the motherboard support DVD into the optical drive.

4. Go to the

Intel AHCI/RAID Driver

menu then click

Intel AHCI/RAID Driver path

open the RAID driver folder.

5. Select

32bit

64bit

folder depending on your operating system. Copy the files of the

selected folder to the root path of your USB floppy disk drive.

Write-protect the floppy disk to avoid a computer virus infection.

5.2.3

Installing the RAID driver during Windows

installation

To install the RAID driver for Windows

During the OS installation, click

Load Driver

to allow you to select the installation

media containing the RAID driver.

2. Insert the USB flash drive with RAID driver into the USB port or the support DVD into

the optical drive, and then click

Browse

3. Click the name of the device you’ve inserted, go to

Drivers > RAID

, and then select

the RAID driver for the corresponding OS version. Click

4. Follow the succeeding screen instructions to complete the installation.

Before loading the RAID driver from a USB flash drive, you have to use another computer

to copy the RAID driver from the support DVD to the USB flash drive.

To set up a Windows

UEFI operating system under RAID mode, ensure to load the UEFI

driver for your optical drive.

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands