Asus ESC700 User Manual Download Page 141

Page: 141 / 160

ASUS ESC700 G3

5-3

5.1.2

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance, install

identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

Install the SATA hard disks into the drive bays.

Connect the SATA signal cables.

Connect a SATA power cable to the power connector on each drive.

5.1.3

Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID sets using SATA

HDDs.
To set the RAID item in BIOS:

Enter the BIOS Setup during POST.

Go to the

Advanced

PCH Storage Configuration > SATA Controller 1

Mode Selection

, then press <Enter>.

Set the SATA Mode item to

[RAID Mode]

Save your changes, and then exit the BIOS Setup.

Refer to Chapter 4 for details on entering and navigating through the BIOS Setup

Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at

RAID mode together.

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands