Asus ESC700 User Manual Download Page 107

Page: 107 / 160

ASUS ESC700 G3

4-31

4.6.1

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects.

The items in this menu may vary based on the CPU installed.

Hyper-Threading [ALL] [Enabled]

This item allows you to enable/disable the Hyper-Threading for logical processor threads.
Configuration options: [Enabled] [Disabled]

Intel Adaptive Thermal Monitor [Enabled]

This item allows you to protect the CPU by decreasing its frequency as it reaches the thermal

throttle point. The thermal monitor includes TM1 (Thermal monitor 1), TM2 (Thermal monitor

2), and EMTTM (Enhanced Multi-threaded Thermal Monitoring).
Configuration options: [Disabled] [Enabled]

Limit CPUID Maximum [Disabled]

When set to

[Enabled]

, this item allows the legacy OS to boot even without support for CPUs

with extended CPUID functions.
Configuration options: [Disabled] [Enabled]

Execute Disable Bit [Enabled]

Execute Disable prevents certain classes of malicious buffer overflow attacks when

combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3).
Configuration options: [Disabled] [Enabled]

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands