Asus ESC700 User Manual Download Page 65

Page: 65 / 160

ASUS ESC700 G3

3-17

Intel

X99 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34,

SATA6G_56/SATAEXPRESS_1)

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

configuration with the Intel

Rapid Storage Technology through the onboard Intel

X99

chipset.

•

These connectors are set to

[AHCI Mode]

by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to

[RAID

Mode]

. Refer to section

4.6.3 PCH Storage Configuration

for details.

•

Before creating a RAID set, refer to the manual bundled in the motherboard support

DVD.

•

The SATAEXPRESS_1 connector can support one SATA Express device or two

SATA devices.

•

Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports (black) do not

support Intel

Rapid Storage Technology and RAID configuration.

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Related manuals for ESC700

Brands by name

Popular brands