Asus ESC700 User Manual Download Page 115

Page: 115 / 160

ASUS ESC700 G3

4-39

4.6.5

USB Configuration

The items in this menu allow you to change the USB-related features.

The

Mass Storage Devices

item shows the auto-detected values. If no USB device is

detected, the item shows

None

Intel xHCI Mode [Smart Auto]

[Auto]

The xHCI is automatically enabled and runs at USB 3.0 mode when the

xHCI driver is installed in the operating system.

[Smart Auto]

Upon detection, the xHCI driver supports the USB 3.0 mode during both

POST and operating system.

[Enabled]

Enables the xHCI controller.

[Disabled]

Disables the xHCI controller.

EHCI Legacy USB Support [Enabled]

[Enabled]

Your system supports the USB 2.0 devices in legacy operating systems.

[Disabled]

Your USB 2.0 devices can be used for BIOS setup only and cannot be

recognized in the boot devices list.

[Auto]

Your system automatically detects the presence of USB 2.0 devices at

startup. If any USB 2.0 devices are detected, the xHCI legacy USB support

is enabled.

Summary of Contents for ESC700

































































































































































Search results

Summary of Contents for ESC700

Reviews:

Brands by name

Popular brands

Asus ESC700, User Manual

Search results

Summary of Contents for ESC700

Reviews:

Brands by name

Popular brands